Audio Technica BP4029 stereo gun micThe Audio Technica BP4029 stereo shotgun mic has cardioid and figure-of-eight capsules configured in an MS (Mid-Side) arrangement with switchable internal matrixing so you can choose wide or narrow stereo or discrete Mid-Side outputs. There's also a switchable low frequency roll-off filter. It is 9.29" long by the way so it will go into a Rycote Windshield kit 4 but of course you need the version with XLR5 connbox. | FREQUENCY RESPONSE | 40-20,000 Hz | | LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave | | OPEN CIRCUIT SENSITIVITY | Mid: -30 dB (31.6 mV) re 1V at 1 Pa;
Side: -34 dB (19.9 mV) re 1V at 1 Pa;
LR Stereo: -36 dB (15.8 mV) re 1V at 1 Pa | | IMPEDANCE | 200 ohms | | MAXIMUM INPUT SOUND LEVEL | Mid: 123 dB SPL, 1 kHz at 1% T.H.D.;
Side: 127 dB SPL, 1 kHz at 1% T.H.D.;
LR Stereo: 126 dB SPL, 1 kHz at 1% T.H.D. | | DYNAMIC RANGE (typical) | Mid: 101 dB, 1 kHz at Max SPL;
Side: 101 dB, 1 kHz at Max SPL;
LR Stereo: 102 dB, 1 kHz at Max SPL | | SIGNAL-TO-NOISE RATIO | Mid: 72 dB SPL, 1 kHz at 1 Pa;
Side: 68 dB SPL, 1 kHz at 1 Pa;
LR Stereo: 70 dB SPL, 1 kHz at 1 Pa | | PHANTOM POWER REQUIREMENTS | 11-52V DC, 4 mA typical at 48V, each channel | | SWITCHES | M-S, LR Stereo-Wide (LR-W), LR Stereo-Narrow (LR-N);
Flat, roll-off | | WEIGHT | 103 g (3.6 oz) | | DIMENSIONS | 236.0 mm (9.29") long,
21.0 mm (0.83") diameter | | OUTPUT CONNECTOR | Integral XLR5M-type | | CABLE | Dual 0.61 m (24") shielded two-conductor, terminated in two XLR3M-type connectors | | SUPPLIED WITH | AT8405a stand clamp for 5/8"-27 threaded stands; AT8134 foam windscreen; 5/8"-27 to 3/8"-16 threaded adapter; protective carrying case |
|