Audio Wireless DADM224-MK2-P Diversity Antenna Distribution

Audio Wireless DADM224-MK2-P Diversity Antenna Distribution

Diversity Antenna Distribution Module DADM224-MK2-P is a custom design, which offers the solution to antenna and power distribution requirements for portable sound bag applications. Designed for where the weight and size matters without sacrificing on performance.

The DADM224-MK2-P is a 2 IN and 2 x 4 OUT active antenna distribution system with in-built very selective out-of-band rejection, very low insertion loss band-pass filtering; the DADM224-MK2-P eliminates multiple receiver antennas and provides a tidy sound bag solution with improved RF performance.

The antenna inputs are BNC connectors which enables use of standard low loss RF extension cables, and the outputs are 2 x 4 mini RF SMA connectors feeding the diversity receivers.

In applications when remote antenna powering is needed, the DADM offers switchable MHA powering with RED LEDs indicating power ON/OFF status, the MHA powering can be turned ON/OFF through the OLED display menu.

The DADM224-MK2-P has a very high input signal handling capacity with very low noise figure and offers an outstanding inter-modulation performance when compared to other low power devices available.

The tuning bandwidth is custom designed with a semi broadband response to suit varying applications; the system gain is user adjustable in 1dB steps between +6dB to -10dB, the DADM224-MK2-P is compatible with digital, hybrid and analogue radio microphone receivers available in the industry.

The DADM is externally powered between 10-18Vdc, the dc input connector is an industry standard 4-pin Hirose and there are 4 x Hirose dc output connectors available for powering auxiliary equipment. Each dc output port can be individually turned ON/OFF through the OLED menu. A green LED indicates power-on status of the system box and the OLED display continuously displays dc input voltage.

Audio Wireless semi broadband and digitally tuned systems are now first choice among freelance sound engineers, hire companies as well as major broadcasters for all wireless microphone applications.

RF Distribution Section

• Frequency Range 470 to 1164MHz in bands
• Input Impedance 50 Ω Output Impedance 50 Ω
• Gain (each output) +6 dB to -10dB, user adjustable
• Current Consumption 140Ma at 140V dc

UHF Bandpass Type

• Available Bandwidths (to order):
  470-700MHz
  470-608MHz
  470-960MHz
  470-990MHz
  960-1164MHz
  
• OIP3 >+41dBm
• Port to port isolation >20dB (min)
• Noise Figure <2dB

Connections

• RF Inputs 2 x 50 Ω Standard BNC Sockets
• RF/DC outputs to receivers 2 x 4 x 50 Ω mini UHF SMA sockets
• Main ON/OFF Switch Master Switch
• DC Power OUT 2 x 2 x 4-pin Hirose sockets individually fused and protected against reverse polarity.
• DC IN Pinouts Pin 1+2 (-ve) and Pin4+3 (+ve)
• DC OUT Pinouts Pin1 (-ve) and Pin4 (+ve)

Powering

• Remote Antenna Powering Switchable dc T-bias powering, 12Vdc @ 250mA max, regulated for active antenna powering, short circuit protected
• Hirose dc output - Unregulated incoming volts, switched, individually fused and protected against reverse polarity
• Total Current Withdraw 3A (max)

Outer Case

• Dimensions 158x68x34mm (WxHxD)
• Weight 400g
• Related accessories:
  8 x SMA to SMA link cables (custom lengths)
  2 x BNC to BNC Antenna extension cables (custom lengths)
  1 x 4-pin Hirose to 4-pin Hirose dc power cable (custom lengths)
  2 x Monopole BNC Antenna
  1 x LPDA-DIV
  2 x LPDA-P
  2 x LPDA-A-WB
  2 X LPDA-A-DT V2