Ambient UMP III Mic Power Supply
Give your microphone the juice it needs without adding a lot of extra weight to your boom pole, with the Universal Microphone Power Supply UMP III from Ambient.
Features of the Ambient UMP III
Long run time
UMP stands for Universal Microphone Power Supply. The Ambient UMP enables the use of Phantom or T-powered microphones on a “wireless boom” with typical belt pack transmitters. This 3rd generation of the UMP is not only easy to operate with one simple button, but provides a run time of several hours per charge depending on the microphone used.
Enough power whenever, wherever
The autonomous supply avoids additional drain of the belt pack’s batteries and ensures long battery lifetime plus making the unit compatible with any transmitter with mic-level input. You can mount the UMP III either on the boom tip or carry it on your belt with an optional clip (UMP-BC).
Standardized batteries for greener production
Thanks to rechargeable NP-50 batteries you can use the same batteries you already have in your kit for the Lockit, microphones or radio transmitters. Working more green on set has never been easier.
Light as a feather
Since NP-50 batteries are much slimmer than e.g. AA batteries, the UMP III is very small. Ambient were able to cut its volume and weight by 40 % compared to its predecessor.
High compatibility
The UMP III is compatible with any transmitter with mic-level input. In- and output connectors let you configure them individually and are keyed against accidental interchange.
LED interface
A 5-colored LED interface indicates battery status, selected powering modes, and LED status check.
What's in the box?
- UMPIII
- Microphone input cable, UMP-EMC
You'll also need an output cable to connect the UMP III to your transmitter. There's a link to the most popular one below, it's for use with Sound Devices A20-Mini transmitters as well as Wisycom, Zaxcom and some Sennheiser models.