Deity SRD Mini RF Distributo

Deity SRD Mini RF distributor

The Deity SRD Mini RF distribution unit enables you to feed multiple radio receivers from one pair of butterfly or sharkfin type antennae. It instantly improves the performance of your wireless system and tidies up your bag by replacing all those individual whip aerials!

Active Splitter

It features an active splitter that also can supply power to external antenna circuitry. Each side of the distro (A / B) can have it's external power toggled on or off independently and above each toggle switch is an LED to indicate if the incoming signal is overloading the RF amp in the SRD-Mini.

Industry Standard Connectors

The SRD-Mini ultitises connectors that are widely used throught the sound community. Two 50 Ohm BNC ports act as the A/B inputs while the output signals are on eight 50 Ohm SMA connectors.

The operational frequency range of the SRD-Mini is 470MHz ~ 1GHz. This allows it to operate anywhere in the world, and with nearly any UHF wireless microphone system you may already own.

Multiple Powering Optons

The SRD-Mini features the Deity Regional Power™ System, allowing it to be powered from the SPD-Mini power distributor's pogo pins for a cable-less power solution but of course it also has traditional power inputs like a 4-Pin Hirose-compatible power input and USB-C.

Specifications

• Frequency Range 470 MHz - 1 GHz
• Gain + 3dB - +9dB
• Port Isolation >20dB
• Input impedance 50 Ohm
• Output Impedance 50 Ohm
• Max input level +13dBm
• Overload Indication 0dBm
• Noise figure <1.5dB
• Input Voltage USB C 5v HRS4 12 - 16.8V
• Current consumption <160mA (HRS4)
• Material aluminium alloy
• Dimensions 115.5 x 78 x 20.8 mm
• Weight 185.5Gm